Accessories for Fasteners
Setting tools, testers and other accessories for installing and inspecting anchor fasteners
42 Products
Filter
- Description
- Injectable mortar accessories for blowing out (Air nozzle)
No technical data available
- Description
- Accessories for injectable mortars, including piston plugs and extension hoses
No technical data available
- Description
- Extension hose to be used together with the HIT-SZ piston plug for injectable hybrid/epoxy mortal
- Plug Diameter
- 12 - 35 mm
- Description
- Extension hose to be used together with the HIT-SZ piston plug for injectable hybrid/epoxy mortal
- Plug Diameter
- 20 - 55 mm
- Description
- Injectable mortar accessories for blowing out
No technical data available
- Description
- Injectable mortar accessories for blowing out
No technical data available
- Description
- Setting tool for HDI anchors with an integrated SDS Plus (TE-C) stop hammer drill bit
- Connection end
- TE-C (SDS-plus)
- Base material
- Reinforced concrete, Concrete
- Working mode
- Hammer drilling
ultimate
- Description
- Setting tool for short HKD anchors with an integrated SDS Plus (TE-C) stop hammer drill bit
- Connection end
- TE-C (SDS-plus)
- Base material
- Reinforced concrete, Concrete
- Working mode
- Hammer drilling
ultimate
- Description
- Setting tool for long HKD anchors with an integrated SDS Plus (TE-C) stop hammer drill bit
- Connection end
- TE-C (SDS-plus)
- Base material
- Reinforced concrete, Concrete
- Working mode
- Hammer drilling
- Description
- Setting tool – required for installation of HDA undercut anchors
No technical data available
- Description
- Setting adapter for capsule anchor rods with hexagon heads
No technical data available
- Description
- Setting tool for capsule anchor rods with hexagon heads
No technical data available
- Description
- Setting tool for capsule anchor rods with conical heads
No technical data available
- Description
- Setting tool for driving compatible expansion anchors into concrete
No technical data available
- Description
- Setting tool – required for installation of HDA undercut anchors
No technical data available
- Description
- Setting tool for capsule anchor rods with Conical heads
No technical data available
- Description
- Setting tool for internally threaded sleeves
No technical data available
- Description
- Disassembly tool – for easy removal of HDA undercut anchors
No technical data available
- Description
- Hand tool to increase speed, quality and safety when setting manual-set drop-in anchors
No technical data available
- Description
- Hand tool to increase speed, quality and safety when setting manual-set drop-in anchors
No technical data available
- Description
- Hand tool to increase speed, quality and safety when setting manual-set drop-in anchors
No technical data available
- Description
- Hand tool to increase speed, quality and safety when setting manual-set drop-in anchors
No technical data available
- Description
- Hand tool to increase speed, quality and safety when setting manual-set drop-in anchors
No technical data available
- Description
- Hand tool to increase speed, quality and safety when setting manual-set drop-in anchors
No technical data available
- Description
- Hand tool to increase speed, quality and safety when setting manual-set drop-in anchors
No technical data available
- Description
- Hand tool to increase speed, quality and safety when setting manual-set drop-in anchors
No technical data available
- Description
- Accessories for X-BT-MF threaded studs, including sockets, T-handles and torque tools
- Additional accessory information
- Socket for tightening X-BT-MF M10 threaded studs
- Description
- Accessories for X-BT-MF threaded studs, including sockets, T-handles and torque tools
- Additional accessory information
- Torque tool for tightening X-BT threaded studs
ultimate
- Description
- Torque-controlled socket wrench for setting HSA anchors
- Connection end
- 1/2 in square
- Description
- 5 Nm torque tool for installing S-BT threaded screw-in studs on aluminium or steel (thickness < 6 mm)
No technical data available
- Description
- Cheque gauge for screw anchors reusability verification in temporary fixings (HUS4, HUS3, HUS2) to attach to SIW impact wrench
- Material, corrosion
- Carbon steel
- Head configuration
- n/a
- PROFIS software
- No
- Description
- Cheque gauge for screw anchors reusability verification in temporary fixings (HUS4, HUS3, HUS2) to attach to SIW impact wrench
- Material, corrosion
- Carbon steel
- Head configuration
- n/a
- PROFIS software
- No
- Description
- HIT injectable mortar accessory sets
No technical data available
- Description
- HIT injectable mortar accessory sets
No technical data available
- Description
- Torque tool for use with new-generation X-BT threaded studs
No technical data available
- Description
- 16 Nm torque tool for installing S-BT threaded screw-in studs on steel (thickness < 6 mm)
No technical data available
- Description
- Injectable mortar accessories for brushing and guiding
No technical data available